Reading Time: 4 minutes

You might be familiar with the damages that fire can cause. A fire has high tendency to cause huge losses. A small lash of the fire has the potential to get converted into an explosion. There are always prior methods of recovery available that would get you out of worse fire situations, whether at home or your workplace.

A fire extinguisher plays a heroic role in worst fire accidents. It is one of the crucial requirements when it comes to an instant solution to deal with fire accidents.

Analyzing the type of fire

Before getting into the preventive measures and rescue operations in case of fire accidents, it’s essential to know; which type of an extinguisher you would go for? What is the kind of fire prevailing your surroundings?

According to the National Fire Protection Association (NFPA), a fire has been classified into five categories in general.

Class A includes fires caused due to the burning of ordinary materials like burning paper, lumber, plastics, cardboard, etc.

Class B includes fires caused by liquids that are flammable and combustible.

Along with that, it also involves fires caused due to organic solvents that are available in chemical laboratories.

Class C includes fires caused due to energized electrical equipment ranging from appliances, panel boxes to hot plates, switches, power tools, stirrers, to name a few.

Water can be an excellent medium for extinguishing class C fire, as the risk of electrical shocks reduces by using a proper water mist extinguisher.

Class D these fires are caused due to the involvement of combustible metals being magnesium, potassium, titanium or sodium. Pyrophoricorgano metallic agents such as alkyl lithium, Grignard, and diethyl zinc are also some of the causes of class D fires.

These materials burn with a very high temperature and react violently when in contact with water. They require cautious handling.

Class K is the class of kitchen fires. The NFAA extinguishers added it to the standard 10 in the year 1998. The kitchen extinguishers that were installed before June 30, 1998, are known to be β€œgrandfathered” in the standard.

Fire extinguishers play a crucial role in case of emergencies or even small fires. Therefore, it becomes vital to have well-equipped fire extinguishers for situations that might go out of control.

Knowing the Fire Extinguisher

A fire extinguisher is an active fire protection device meant to extinguish or have control over small fires, in case of worsened situations.

Although you cannot use it in case of fire that entirely goes out of order, like the one that has reached beyond the ceiling, in that case having the expertise fire brigade is a must.

Problems with the Extinguisher

[block]1[/block]

Many of you might even not know that a damaged canister can cause a massive explosion, putting the lives of many in dangerous situations.

Another issue with a fire extinguisher could be dents or leakage resulting in the blowing up of the canister. In that case, getting connected to a professional fire extinguisher service would be a smart move.

You can request them to visit your place and give a quality check on to the canister and get it replaced if required.

Once you make use of the canister, you need to get it repaired or serviced again. The professionals will get it replaced or re-fill it so that it’s ready to be used again.

Tips for maintaining a Fire Extinguisher

There is a hard need to make sure that you have the right kind of fire extinguishers available to cope up with emergencies. Along with their availability, it’s important to have them in a proper working condition.

Keep the extinguishers in a place from where they can be accessed easily. The extinguishers should be set up in proper order to ensuring that they are easy to handle.

Having a well-charged fire extinguisher is a must. At times we carelessly tend to keep the extinguishers uncharged. This can worsen fire situations. You’ll always need instant access to a fire extinguisher in case of an accident, so it’s better to have it ready to serve for the bad times.

This can be done by observing for a pressure dial. Next thing you need to make sure is to check the pull pin. Give a quality check on the fact that it is secured and its tamper seal is not broken from anywhere.

Also check for the dents, rust, cracks, and other damages that might affect the working of the extinguisher.

Make sure that the modes are not made, as they would affect the performance of the firing device.

Having an instruction manual is a must. It should be posted on the body of the extinguisher itself in a readable format. This manual will give a better idea of its usage to the one trying to make use of it.

The maintenance of a fire extinguisher should be scheduled once in a month and should be carried by a person who has knowledge and experience in handling fire situations.

6-Year Inspection on the fire extinguisher

What exactly is a 6-year inspection Plan?

A six-year inspection plan for the fire extinguisher is in a way similar to an annual inspection. But specific facts make if differentiable from the annual one.

In a six-year inspection plan, the fire extinguishers are emptied so that the inspector can have a closer view of the mechanical parts in its interior.

After the checking is done, professionals re-fill, reseal, and re-pressurize your extinguisher. The inspector makes a record of these steps, taking place as per the six-year inspection plan of yours.

Final Words

By maintaining a set of well-equipped fire extinguishers training at your homes and offices with regular inspections, can save you and your property from getting drenched in the fire.

They not only prevent your place and work from getting effected but also give you a sigh of relief and peace of mind.

Be prepared to tackle any of the fire situations with well equipped and well-inspected fire extinguishers.

LEAVE A REPLY

Please enter your comment!
Please enter your name here